What This Guide Covers
The IOV Pocket Mosfet Mod is a compact, lightweight box mod designed for use with dotAIO-compatible RBAs and tanks. This guide walks through the setup process, explains the three voltage output modes, and highlights the critical thread compatibility note that affects which tips you can use.
IOV Pocket Mosfet Mod at a Glance
- IOV Pocket Mosfet Mod - dotAIO RBA Compatible: Dimensions: 70mm x 39.5mm x 20mm, weight only 23g (without battery/tank). The ultra-lightweight build makes it one of the most portable box mods available, ideal for on-the-go vaping.

IOV Pocket Mosfet Mod - dotAIO RBA Compatible - IOV Pocket Mosfet Mod - dotAIO RBA Compatible: Powered by a Yihi Mosfet with three voltage settings: Red (3.5v), Blue (3.8v), Green (Bypass Mode). Each setting delivers a distinct power level, letting you tailor the draw to your coil and preference.
- IOV Pocket Mosfet Mod - dotAIO RBA Compatible: Resistance range: 0.2 ohm – 2.0 ohm. Supports a wide variety of coil builds, from sub-ohm to higher-resistance mouth-to-lung setups.
- IOV Pocket Mosfet Mod - dotAIO RBA Compatible: Charging via USB-C (5V/1A). Modern charging port for convenient recharging, though battery removal is also an option.
Step-by-Step Setup
- 1. Install a single 18650 battery: The Pocket Mod requires one 18650 battery (sold separately). Insert the battery with correct polarity as indicated inside the battery compartment.
- 2. Attach your dotAIO-compatible tank or RBA: The mod is dotAIO RBA compatible. If your tank or RBA has a slightly different pin height, use the included o-ring riser to ensure a solid positive pin connection.
- 3. Select your voltage mode: Press the single fire button to cycle through modes: Red (3.5v), Blue (3.8v), or Green (Bypass Mode). The LED indicator shows the current setting.
- 4. Check thread compatibility before using a drip tip: Important: The IOV Pocket Mod threads are fragile and not compatible with standard dotMod threaded integrated/hybrid tips. Only use the included 510 tip or compatible alternatives.
Understanding the Three Power Modes
The Yihi Mosfet inside the Pocket Mod offers three distinct voltage outputs. Red mode delivers a steady 3.5v, suitable for lower-wattage builds. Blue mode pushes 3.8v for a warmer vape. Green is Bypass Mode, which outputs the battery's direct voltage — useful for experienced vapers who want to maximize power based on battery charge. Start with Red or Blue and adjust based on your coil resistance and preferred draw.
Compatibility and Precautions
The Pocket Mod is designed for dotAIO-compatible tanks and RBAs, but not all accessories fit. The threads are fragile and are not compatible with standard dotMod threaded integrated/hybrid tips. Always use the supplied 510 tip or a tip confirmed to fit. If your atomizer's positive pin does not make solid contact, use the included o-ring riser from the spares pack. The mod is 3D printed from MJF PA12 Nylon with a double-layer Cerakote finish — handle with care to avoid dropping or overtightening.


