العودة إلى المدونة
أدلة إرشادية 2026-11-20 Online Vape Shop - E-cigs, Vape Supplies, E-juice | Vapor Authority 0 مشاهدة

How to Install 18650 Battery Wraps on Your Box Mod

How to Install 18650 Battery Wraps on Your Box Mod

Learn how to safely rewrap your 18650 batteries using Sturdy Mfg Co. x ODB Wraps. Step-by-step instructions for replacing old wraps and ensuring proper insulator placement.

What You Need to Know Before Rewrapping

Rewrapping an 18650 battery replaces the old, damaged wrap with a fresh one to maintain safe insulation. The Sturdy Mfg Co. x ODB Wraps pack includes four wraps in two collaborative designs, so you can refresh multiple cells or keep spares on hand.

Before starting, understand that re-wrapping requires removing the old wrap, which exposes the bare cell and the positive-end insulator. The insulator must remain in place during the process. Use caution and work on a clean, non-conductive surface.

Step-by-Step Battery Wrap Installation

  1. Remove the old wrap: Starting at the flat negative end of the battery, carefully cut and peel off the old wrap. This direction helps prevent accidental discharge while cutting.
  2. Check the insulator: Once the old wrap is removed, verify that the small ring insulator on the positive terminal is still in place. If it is missing or damaged, replace it before proceeding.
  3. Slide on the new wrap: Take one of the Sturdy Mfg Co. x ODB wraps and slide it over the battery. The wraps may appear upside down initially, but they will orient correctly when used in most Boro Box Mods or dotAIO devices.
  4. Shrink the wrap: Use a heat gun or a blow dryer on the hot setting to evenly shrink the wrap around the battery. Rotate the cell as you apply heat to avoid overheating one spot. The wrap should become snug and smooth.
  5. Inspect your work: After cooling, check that the wrap is fully adhered, with no wrinkles or gaps near the terminals. The insulator should still be visible and centered on the positive end.

Sturdy Mfg Co. x ODB Wraps at a Glance

Safety Tips for Rewrapping 18650 Batteries

Always work on a non-conductive surface and keep metal objects away from the exposed battery. Use only wraps designed for 18650 cells — the Sturdy Mfg Co. x ODB wraps are purpose-made for this size. Never use a wrap that is torn or doesn't fit snugly after shrinking.

If you are unsure about the condition of your battery or the insulator, it is safer to replace the entire cell. Rewrapping is only appropriate for undamaged batteries with no dents or leaks.

مقالات ذات صلة

Customer Service
الرئيسية
المنتجات
السلة
الملف الشخصي