返回部落格
操作指南 2026-11-20 Online Vape Shop - E-cigs, Vape Supplies, E-juice | Vapor Authority 0 瀏覽

IOV Pocket Mosfet Mod: Build and Compatibility Guide

IOV Pocket Mosfet Mod: Build and Compatibility Guide

Learn how to set up the IOV Pocket Mosfet Mod, understand its dotAIO RBA compatibility, and follow key precautions for safe use.

What This Guide Covers

The IOV Pocket Mosfet Mod is a compact, lightweight box mod designed for use with dotAIO-compatible RBAs and tanks. This guide walks through the setup process, explains the three voltage output modes, and highlights the critical thread compatibility note that affects which tips you can use.

IOV Pocket Mosfet Mod at a Glance

Step-by-Step Setup

  1. 1. Install a single 18650 battery: The Pocket Mod requires one 18650 battery (sold separately). Insert the battery with correct polarity as indicated inside the battery compartment.
  2. 2. Attach your dotAIO-compatible tank or RBA: The mod is dotAIO RBA compatible. If your tank or RBA has a slightly different pin height, use the included o-ring riser to ensure a solid positive pin connection.
  3. 3. Select your voltage mode: Press the single fire button to cycle through modes: Red (3.5v), Blue (3.8v), or Green (Bypass Mode). The LED indicator shows the current setting.
  4. 4. Check thread compatibility before using a drip tip: Important: The IOV Pocket Mod threads are fragile and not compatible with standard dotMod threaded integrated/hybrid tips. Only use the included 510 tip or compatible alternatives.

Understanding the Three Power Modes

The Yihi Mosfet inside the Pocket Mod offers three distinct voltage outputs. Red mode delivers a steady 3.5v, suitable for lower-wattage builds. Blue mode pushes 3.8v for a warmer vape. Green is Bypass Mode, which outputs the battery's direct voltage — useful for experienced vapers who want to maximize power based on battery charge. Start with Red or Blue and adjust based on your coil resistance and preferred draw.

Compatibility and Precautions

The Pocket Mod is designed for dotAIO-compatible tanks and RBAs, but not all accessories fit. The threads are fragile and are not compatible with standard dotMod threaded integrated/hybrid tips. Always use the supplied 510 tip or a tip confirmed to fit. If your atomizer's positive pin does not make solid contact, use the included o-ring riser from the spares pack. The mod is 3D printed from MJF PA12 Nylon with a double-layer Cerakote finish — handle with care to avoid dropping or overtightening.

相關文章

Customer Service
首頁
商品
購物車
我的