DNA60 SBS Mods Compared: Vypers Blade vs Gepetto Grip TG-R

Two DNA60 mods, two different jobs

The Vypers Vapers X WICK'D Blade DNA60 and the Gepetto Mods Grip TG-R SBS both run Evolv's DNA60 platform, but they solve different problems. The Blade is a compact, magnetic-panel box mod with a 1–60W range and a 25mm atomizer limit. The Grip TG-R is a side-by-side (SBS) design built around a 38mm 510 connector drop for flush atomizer placement, with a DNA60C color screen and burl wood accents.

Neither is a beginner pod. Both are enthusiast hardware, and the right pick depends on whether you prioritize pocketable simplicity or artisan SBS ergonomics.

Chipset and power: same DNA60 family, different screens

• Vypers Vapers X WICK'D Blade DNA60 Box Mod: Evolv DNA60 chipset with 1–60W output and EScribe customization. The Blade gives you the DNA60 feature set in a straightforward box format, with EScribe tuning available.

  

• Gepetto Mods - The Grip TG-R SBS: Evolv DNA60C chipset with color screen and full EScribe software customization, up to 60W with temperature control. The Grip TG-R adds a color interface and explicit temperature control support, which may matter if you fine-tune vape profiles.

  

Battery and charging: one 18650, two approaches

The Blade is powered by a single 18650 battery (not included) and includes a USB-C cable. The Grip TG-R also uses a single 18650 battery (not included) and has a USB-C charging port. Neither mod includes a battery, so factor a quality 18650 into your budget. The supplied information does not specify charging current or pass-through capability for either device, so treat USB-C as a convenience rather than a primary charging strategy.

Atomizer fit: 25mm limit vs 38mm SBS drop

• Vypers Vapers X WICK'D Blade DNA60 Box Mod: Fits up to 25mm atomizers; dimensions 72mm x 25mm x 44mm. The Blade's 25mm width sets a hard ceiling for tank diameter. Anything larger will overhang.
• Gepetto Mods - The Grip TG-R SBS: 510 connector machined to exactly 38mm for flush side-by-side atomizer placement; pairs with tall RTAs such as the AB Mods Rafi or other 22mm RTAs. The Grip TG-R is optimized for 22mm RTAs in an SBS layout. The 38mm drop is a specific fit target, not a universal one.

Materials and finish: stainless steel vs 3D-printed ABS-GF

The Blade uses stainless steel and aluminum construction with magnetic panels. Finish options are Black Body/Silver Accents, Silver Body/Black Accents, and Full Black. The Grip TG-R uses ABS-GF, a glass-fiber reinforced 3D-printed material described as lightweight, heat-resistant, and chemical-resistant. It comes with a standard or "Goyard" textural pattern, the latter slightly increasing dimensions. Accent wood options are Honduran Rosewood Burl (HBR) or Amboyna Burl on the fire button, adjustment buttons, and bottom plate. The Grip TG-R is made in Poland and weighs .47 lbs including box and packaging.

If you want metal heft and a choice of three finishes, the Blade is the clearer fit. If you want a handcrafted SBS with wood accents and a pocket-friendly profile, the Grip TG-R is the one.

Side-by-side decision points

• Form factor: Blade: compact box mod (72 x 25 x 44mm). Grip TG-R: side-by-side, pocket-friendly profile.
• Atomizer compatibility: Blade: up to 25mm. Grip TG-R: 38mm 510 drop for flush SBS placement, best with 22mm RTAs.
• Chipset display: Blade: DNA60 (screen type not specified in supplied info). Grip TG-R: DNA60C color screen.
• Materials: Blade: stainless steel and aluminum. Grip TG-R: ABS-GF with burl wood accents.
• Battery: Both: single 18650, not included.
• Price (catalog): Blade: USD 87.50 (compare at USD 174.99). Grip TG-R: USD 200.00 (compare at USD 399.99).

What the specs do not tell you

The supplied records do not include operating instructions, temperature control specifics for the Blade, or charging current for either mod. The Grip TG-R's weight is listed with packaging, so the mod's own weight is not confirmed. Neither product listing confirms whether the 18650 battery is user-replaceable without tools, though the exclusion of the battery suggests it is. For any setup or safety procedure, consult the user manual included with the Blade and the documentation provided with the Grip TG-R.

Who should pick which

Choose the Vypers Vapers X WICK'D Blade DNA60 if you want a compact, metal-bodied DNA60 mod with a clear 25mm atomizer ceiling, three finish options, and a lower catalog price. It suits vapers who already own 22–25mm tanks and want EScribe customization without an SBS layout.

Choose the Gepetto Mods Grip TG-R SBS if you prefer a side-by-side form factor, plan to use 22mm RTAs, and value artisan materials and a color DNA60C screen. It is the more specialized, higher-cost option, and its 38mm connector drop is a deliberate fit choice rather than a universal one.

Both are DNA60-class devices, so your decision should come down to atomizer size, form factor, and materials—not chipset alone.