Back to Blog
How-to Guides 2026-11-21 Online Vape Shop - E-cigs, Vape Supplies, E-juice | Vapor Authority 0 views

Veepon TITA AIO 60W: Setup and Operating Guide

Veepon TITA AIO 60W: Setup and Operating Guide

Learn how to set up and use the Veepon TITA AIO 60W all-in-one system, including battery installation, coil priming, and wattage adjustment.

Getting Started with the Veepon TITA AIO 60W

The Veepon TITA AIO is a 60W all-in-one vape mod system with dotAIO tank compatibility. This guide covers the essential steps to set up and operate the device safely. Before using, ensure you have a single high-amp 18650 battery (not included) and your preferred e-liquid.

Battery Installation

The TITA AIO is powered by a single 18650 battery. Follow these steps to install it correctly.

  1. Open the Battery Door: The threaded battery door has a swing-out tab. Unscrew the door and swing it open to access the battery compartment.
  2. Insert the Battery: Insert a single high-amp 18650 battery with the positive end facing the correct polarity markings inside the compartment. Close the battery door securely.

Coil Installation and Priming

The TITA AIO uses press-fit coil installation. The kit includes two TITA Mesh Coils: a 0.25ohm and a 0.6ohm coil. The tank is also compatible with dotStick and Nord coils.

  1. Prime the Coil: Apply a few drops of e-liquid to the exposed cotton wicking ports and the top of the coil. This prevents dry hits.
  2. Install the Coil: Press the coil firmly into the base of the TITA Tank until it snaps into place. Ensure it is seated evenly.
  3. Fill the Tank: The tank has a front fill port with a silicone plug. Open the plug and fill the tank with e-liquid. The tank capacity is 2.7ml. Replace the plug securely.
  4. Reattach the Tank: Screw the tank back onto the device. Note: If using an aftermarket compatible tank, the faceplate may not seat properly due to fill port plug placement.

Using the VP60 Chipset

The TITA AIO features a VP60 chipset with wattage mode only. The display shows atomizer resistance, wattage, voltage, and battery state. Use the dual adjustment buttons to set your desired wattage in 0.1W increments up to 60W. The resistance range is 0.08-3ohm. The chipset is simple but effective for delivering power to the atomizer.

Veepon TITA AIO 60W Specifications

Faceplate and Compatibility Tips

The tank, screen, and adjustment buttons are hidden behind a removable magnetic faceplate. If you use an aftermarket compatible tank, the faceplate may not seat properly due to differences in fill port plug placement. The manufacturer suggests that PCTG faceplate panels (sold separately) can improve fit in such cases. The BP Mods Pioneer RBA fits without issue, while the Orca Vape Silo works better with the PCTG faceplate.

Charging and Daily Use

The device has a USB-C port for convenient charging, but charging through the device is not recommended for battery longevity. For best results, use an external charger for the 18650 battery. The side firing button and adjustment buttons are easy to use. The device offers a clean look with the faceplate in place.

Related Articles

Customer Service
Home
Products
Cart
Profile